To apply
Always iron on a hard flat surface ( not a padded ironing board ).
Remove backing sheet from transfer and check design to make sure no rhinestones have moved – if so use tweezers to reposition.
Place the transfer sticky side down onto the fabric.
Place sheet ( eg.pillowcase ) over the top of the design.
If using the transfer on a t-shirt place a towel or cardboard between the inside of the garment.
Set the iron on a medium or wool setting. NO STEAM.
Iron directly on to the top sheet for a minimum of 45-60 seconds. Heavier fabrics such as denim may need longer.
Do not move the iron, just let it sit in place, do this all over the transfer in sections.
Allow to cool, and then slowly remove the transfer paper, if any of the rhinestones are not stuck then replace the transfer paper and re-apply the heat.
After the transfer paper has been removed, turn the garment inside out, place a cloth or piece of cardboard inside the garment and one over the transfer and re-press for about 15 seconds.
MONU SKINCARE cannot be held responsible for any incorrect logo applications.